3 Backlash Levels, as low as 3 arc-min
IP65 environment protection
Motor adaptors for any servo motor, 50w through 5kW
24 hour delivery
he Circulute 3000 Reducer is EP’s next era cycloidal velocity reducer. It utilizes 52100 grade bearing metal on most of its speed reduction components. It really is offered with a full two year guarantee, not tied to hours of operation, and is able to endure abuse that would break the teeth of ordinary rate reducers.
The EP 3000, readily available with inputs for both servo and induction motors, includes a compact design with single reduction ratios of 11:1 to 71:1 at 95% operating efficiency. Provided in two backlash rankings and multiple mounting choices, the EP 3000 includes a design tough enough for both servo and standard induction electric motor applications. The initial two piece pin casing design guarantees output shaft backlash ratings of significantly less than 6 arc-min.
The EP offers a solution for ultra-high precision, obtaining accuracies up to 20 arc-seconds. The EP allows an application to attain negligible backlash, maintain exceptional rigidity, and increase control stability to ensure that the desired output motion can be easily achieved. The look is truly a unique concept, employing a full contact screw-like transmission for high efficiency and elimination of use. The unit provides maximum compactness using orthogonal axes and includes a big hollow shaft for flexibility.
WORM SERVO GEAR REDUCER
Wide range of servo gearboxes, designed to fit virtually all servo motors found on the market
Designed for the highest torsional stiffness and the cheapest angular backlash, to get the maximum torque and overhung loads
Bush with slot machine games and hub clamp for servomotor coupling
Enhanced dimensional compactness because of direct servomotor coupling
Widest range of possible servomotors coupling dimensions.
The right technical solution thanks to a comprehensive range of sizes, gear stages, transmission ratios, designs and nonstandard designs.
Servo gear reducers (worm, coaxial, helical and bevel helical systems) Catalog SR
Operating instructions for equipment reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is pleased to announce the growth of our range of Servo Reducers, right now offering five degrees of precision to meet any program requirements. The five levels of precision offered allows a machine developer to select the required reducer precision to meet up their needs and their spending budget. They can be purchased in both in-line and right-angle versions, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Normal applications for these reducers include rotary & linear axis drives, and material handling axis drives. Industries offered include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
The mounting faces of the HT, HP, E and B versions are identical, which makes it possible to interchange a unit with an increased or lower accuracy unit if needed.
A wide range of engine couplings and installation flanges are available for the complete reducer range to mount virtually any servo engine and the hollow bore output can be utilized to install output shafts, pinion shafts, or other drive components.
These reducers are usually selected based on the peak cycle forces, which usually happen during accelerations and decelerations. These routine forces depend on the driven load, the rate vs. period profile for the routine, and any other exterior forces functioning on the axis. For more selection information, please follow this PDF link.
For application & selection assistance, please call, fax or email us. Your application information will be examined by our engineers, who’ll recommend the best solution for the application.
EP Inc. provides a full range of modular servo gearboxes /worm reducers. The modular style permits configurations with motor insight flange and output pinion for rack and pinion drives, and also solid result shafts, Hollow bore output, and input shafts for all the positioning applications. The modular design allows for universal installation of the gearbox in any orientation.
They can be utilized on motors with a NEMA23 standard flange through an adaptor package. As the gears are normally angled, they lead to a short total length of the electric motor and its gear.
The series can also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole may also be built on the gear’s output side.
Built with a simple and robust design, the series offers gearing ratios that range between 6:1 to 75:1. An individual can also customize the materials through the order, so as to match the apparatus to its intended program.
The Precision Planetary Gears of the EPRG series contains a comprehensive range of low backlash planetary gearboxes, with up to class 3′ precision, obtainable in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to 1 1:1,000). These models also include versions with dual shaft, right angle shaft and right position output, in addition to a full selection of adapters for electric motor mounting, making them with the capacity of meeting certain requirements of also the most different applications. They are designed for make use of with included servo and stepper EP motors, mounted directly or via adaptor flanges, but may also be used in combination with other EP electric motor types. This range of products is founded on years of experience and represents the end result of a decade-long analysis targeted at improving performance.
Maximum precision and dynamics, coupled with remarkable torque density, are the key requirements specified for reliable servo gearboxes used. EP provides servo gearboxes for just about any program and any performance range. Our low-backlash planetary and right-angle gearboxes reflect our enthusiasm for innovation and the best levels of precision.
Worm gear reducers provide market enhance solution with performance and flexibility. Low number of basic models could be applied to a wide selection of power ratings guaranteeing best performance and reduction ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are designed for high-performance mechanical tools. When the motor velocity needs to be reduced, the result torque raises and send torque totally to the application form. We believe that customers will appreciate our gear reducer to accomplish their demand. Just check out EP, you can get more information regarding servo gearheads, servo gearboxes, and gear reducers. We continue to keep going forward for your support.
Plug the Rate Reducer in to the desired channel of your receiver, and connect the business lead from your servo (or servo wye) into the male servo lead coming from the circuit table. The established screw on the blue trim pot, located close to the top of the primary circuit board, is utilized to control the speed of the servo. Convert the set screw fully clockwise (CW) for normal servo speed with no speed reduction, fully counter-clockwise (CCW) for optimum speed reduction, or anywhere in between for partial swiftness reduction. The reddish LED indicates three possible conditions: Slow Blinking = No Signal; Solid On = No Velocity Reduction; Fast Blinking = Reduced Rate Setting
Please note that if you make any change to the speed setting while the receiver is on, you need to cycle power to the receiver (switch if off and back again on) for the new speed establishing to take effect. This circuit may also be utilized in conjunction with our Servo Reverser to cause flap or retract servos to turn in opposite directions for right function. Instructions are included for easy set up and use.
IMPORTANT NOTE: This device will only focus on a normal, proportional servo. You won’t focus on a retract-type servo, as they do not identify any servo positions apart from clockwise (CW) and counter-clockwise (CCW). Retract servos can’t be slowed down, also by a transmitter that includes this function, as their design and electronics don’t allow it. Verify the FAQ page for more information.
This device will certainly reduce the speed of any regular, proportional servo. Connect it in the middle of your receiver and the servo (or servos) you intend to control for a far more scale-like movement of flaps or retracts. Adjustable, it can be set to lessen the rate of your servo from super-slow movement to no speed reduction at all, with an almost infinite number of positions among. Maximum reduction time for a servo to travel 90 degrees is about 14 seconds, minimum time (no reduction) is merely the normal rate of the servo. Ideal for reducing or eliminating the tendency of a plane to “balloon up” when flaps are deployed. It can be utilized to control more than one servo by utilization of a normal servo Y.
This is the new regulated version that can be used on radio systems powered by any size or kind of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH electric batteries, and HV (high voltage) receivers that operate on 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Existence batteries. This unit will NOT reduce the voltage going to your servos.
The EP Gear Reducer may be the perfect solution for servomotor applications such as packaging devices, gantries, injection molding devices, pick and place, and linear slides.Offered in concentric shaft, correct angle solid shaft, and right angle hollow shaft styles with modular adaptor flanges and keyless compressible bushings to easily mount to any kind of manufacturer’s servo engine. The EP Series helical gears have got slanted teeth in comparison to spur gears with straight cut teeth, creating a smoother gear mesh, yielding considerably lower noise levels.
The reduced backlash EP planetary servo gear units are designed for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. They were designed to combine the best possible flexibility and cost-efficiency because don’t assume all application requires high-performance components.
They provide a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo gear units can be found in the following versions:
PSC = B5 output, even output shaft
PSKC = B5 result, with keyway
PSCZ = B14, result, smooth output shaft
PSKCZ = B14 output, with keyway
Fascinated in finding out more about servo gear reducer? Have a look at our web site.