Materials Handling Power UNIT two
Common Description
This energy unit characteristics energy up gravity down circuit. Activate the start out solenoid to start the motor to lift the machine. The lowing movement is activated from the solenoid valve with all the decreasing speed managed from the strain compensated flow manage valve. Solutions of this series is usually broadly used in the business of logistic gadgets like fork lift, mini lift table, and so on.
Special Notes
one. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean the many hydraulic parts concerned prior to mounting the power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which ought to also be clean and absolutely free of impurities, N46 hydraulic oil is advised .
4. Oil changing is needed right after the initial one hundred operation hrs,afterwards as soon as each 3000 hours.
five. The energy unit really should be mounted horizontally.
Material Handling Electrical power UNIT 1
General Description
This power 
unit is made for your fork lift business, consisting of extremely effective gear pump, DC motor, manual increase and reduce valve, tank, ect. The up and down motion are managed through the lever of the manual release valve, which can be outfitted with an electrical switch to activate the motor. The lowing speed is controlled by the strain compensated flow manage valve.
Exclusive Notes
1. The duty of this power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean each of the hydraulic elements concerned just before set up of the energy unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which should really also be clean and totally free of impurities, N46 hydraulic oil is suggested .
four. Oil modifying is needed right after the original 100 operation hours, afterwards after each and every 3000 hours.
five. The energy unit proven is intended to be mounted horizontally.