Worm drive gearbox with motor
worm motor
A robust worm-travel gearbox powered by an MM28 engine. Ideal applications where a simple to match, high torque outcome is required. Ideal for student based projects which includes robots and buggies.
The unit has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. Electronic.g. cutting down to size. The electric motor is snap installed into its cradle to activate the gear and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor is not turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for small strolling robots, lifting mechanisms, and additional applications where excessive torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draft to some amps, making them ideal candidates for the DRV8833 motor driver carrier. Electric motor overheating can be caused by excessive stalling, also at very low voltages. We recommend that you use stall-detection sensors, or simply check out your robot, to ensure that it doesn’t stall for more than a few seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also suits on small threaded end of the shaft, although it is not particularly intended to work with this type of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors established new specifications for reliability, performance and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly style provides for easy integration now and a really future proof remedy. The Ever-Power gear electric motor offers total versatility in mounting options includes shaft, base, encounter, and flange alternatives. The engine terminal box could be mounted in choice positions rotated in 90º steps around the motor frame providing for unparalleled integration opportunities.
Ever-Power gear motors comply with UNITED STATES and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a genuine total remedy for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be utilized outdoors or in wet and dusty conditions without the use of additional enclosures. Complete rated output is available at the output shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the solution for applications requiring a good corner turn, optional dual result, or an inability for the engine to be back again driven. The DC correct angle equipment motors are designed for continuous and intermittent duty operation. Our right angle gear reducers are designed with many mounting plate options, making them ideal for a number of DC electric motor based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are created to generate high torque in a small package size. Worm Equipment Motors are excellent for applications that require a self- locking or breaking characteristic since the output shaft can’t rotate when there’s no power applied. Also, Worm Gearheads can transfer movement in 90 degrees. With various reduction ratios, precision minimize gears, voltages and sizes, EP Items includes a DC Worm Gear Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Devices / Security Gates / Dental Chair / Ambulance Cots & Stretchers Many of our DC Motors can be complimented with one of our Worm Gearheads. EP Items will work with you to create and manufacture a Worm Gear Engine which will optimize the efficiency of your unique application.
Built to your specific requirements
Engine Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Slash / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine uses a metal gear box for strength and a higher torque output. Due to the special mechanical framework of the worm get the motor output shaft is certainly self locking and may not be rotated.
This part uses a two wire connection and supports direction control and also PWM speed control. Rated voltage is 12v and will achieve 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear devices from EP DRIVESYSTEMS especially display their strength in applications where large gear ratios are essential. Our worm geared motors will be consequently optimally suited for use in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions allow simple and effective cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular design give users optimum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each of these has its own unique requirements. The EP series worm equipment motors could be quickly and efficiently adapted to satisfy your needs.
Worm gear units impress with their great power density and compact style. If required, we are able to also source them with the highly effective nsd tupH surface treatment.
As well as the basic EP casing, we offer an extensive type of bolt-on elements to customize the product including torque arms, shaft covers and output flanges. These can be easily field set up, but we may also be happy to assemble the individual components for you.
Find out more about the modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm equipment unit SMI
SMI worm gear units feature a simple, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes this product ideally suited for severe and challenging industries like meals processing and pharmaceuticals.
Adaptable input designs such as for example NEMA, IEC or immediate motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units possess on all sides several repairing possibilities and enable a simple assembling for the client.
Other drive configurationscan be created by use of built-on components (e.g. torque arm and result flanges). The housings are created in light weight construction out of aluminium die cast. Electric motor attachment is realised generally through IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Travel Gearbox with Motor – incorporating the next features: 1 to 6V voltage rating, 17100 rpm no load swiftness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm vast, 40mm high, a robust worm travel gearbox powered by an MM28 motor (included), most ideal for applications where a simple to match, high torque output is necessary, nylon housing and gear, requires light oil or perhaps silicon grease lubrication, ideal for student based projects including robots and buggies.
Most suitable for applications where a simple to match, high torque productivity is required
Ideal for student based projects including robots and buggies
Reversible Excessive torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible Excessive torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Features:
The engine is Gear DC electric motor with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared engine with self-lock, that is, regarding motor without electric, the output axis is fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole electric motor output shaft relatively-short than general gear electric motor, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the home window, door, Mini winch. Ect.
In sumo robot or combat robot competition where excessive holding torque’s electric motor is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely an improved option compared to the spur gear motor. How come worm gear so unique? Check this wiki out: Worm Get.
“Unlike with ordinary equipment trains, the direction of transmission (insight shaft vs result shaft) is not reversible when using large reduction ratios, because of the greater friction involved between your worm and worm-wheel, when usually an individual start (one spiral) worm can be used. This can be an advantage when it is desired to remove any possibility of the result driving the input.”
In other phrases, it is hard to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

Please don’t hesitate to contact us if you have any type of confusion concerning worm motor.