Standard Description
Consisting of a pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is designed to operate material managing products. The decreasing movement is achived through the solenoid valve using the reducing velocity managed by an adjustable needle valve. The left and ideal functions are outfitted that has a dual pilot operated check valve and cross-over relief valves.
Remark: Please talk to our income engineer for that different pump displacement, motor power or tank capability.
Distinctive Notes
1. This energy unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
two. Clean every one of the hydraulic components concerned just before installation of the energy unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst, which ought to also be clean and cost-free of impurities.N46 hydraulic oil is proposed.
4. This electrical power unit must be mounted horizontal.
5. Check the oil level within the tank following the first begin of your electrical power unit.
six. Oil modifying is needed immediately after the initial 100 operation hours, afterwards once each and every 3000 hrs.