Equiped using a reversible motor, a bidirectional gear pump, double P.O. checke valves, relief valves and a tank, this power unit can drive a double acting cylinder to extend and retract without a directional solenoid valve. It really is commonly utilized in recre-ational vehicles, pleasure boats and transportable phases, and so forth.
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean the many hydraulic parts concerned just before installation of the power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of charge of impurities. N46 hydraulic oil is advised.
4. The power unit proven is built to be mounted horizontally.
5. Oil modifying is needed following the first 100 operation hrs, afterwards once each and every 3000 hours.
6. Check the oil level while in the tank following the first running on the energy unit.