• Electric motor gearboxes are maintenance-free, small power resources for driving vent, display, house and flap ventilation systems in greenhouses.
• Single phase and 3 phase choices for your own needs.
• Key feature of the drives are a self-braking worm gear transmission and an integral linear limit switch device.
shaft-installed gear motors are finish electromechanical drives where the speed of the installed electric motor is reduced to the desired value using two to 4 reduction stages. The drives are high performance and durable and feature a compact and lightweight design.

The compact design is made possible through the combination of a spur/worm gear drive with motors optimized for performance. motors also feature a 60 to 70 percent weight-loss compared to commercially offered drive motors. This is attained through the constant application of light weight aluminum die casting technology, which guarantees a high degree of rigidity for the gear and motor housing simultaneously.

Each drive is produced and tested particularly for each order and customer. A sophisticated modular system allows for an excellent diversity of types and a maximum degree of customization to client requirements.

Because of their integrated control models, the shaft-mounted equipment motors are the ideal drives for applications in reversing setting. In both rotation directions, defined end positions are guarded by two position limit switches. This uncomplicated remedy does not only simplify the cabling, but also can help you configure the end positions efficiently. The high shut-off precision of the limit switches ensures safe operation shifting forwards and backwards.
This gearmotor integrates a gearbox, an electric motor, and limit switches. It is connected with a metal shaft to carefully turn the pinions for greenhouse ventilation. With the support of electric panel, it can run and then stop after set quantity of turns. After that it can open and close the windows for greenhouse ventilation to correct positions.
To keep the delicate environment in the greenhouse, weather control systems are a necessity. Numerous mechanical systems can be applied in this respect; however glass vent drive systems tend to be the most popular. The drive system includes a central gearmotor connected to a 40:1 right angle reducer with dual output shafts. These OP shafts connect to long jack shafts that spread across the roof type of the greenhouse connecting to multiple rack and pinion mechanisms that open up and close large cup windowpane panes in the ceiling for temperature control.
Depending on the size of the application form (length of the shafting, quantity and weight of the windowpane panes) we provides two gearmotor solutions from a modified version of their 200 series parallel shaft collection – 1/5 HP and 1/20 HP. The application Is generally intermittent in use; nevertheless the motors are ranked continuous since the glass pane home windows may potentially be under continuous, subtle adjustment throughout the day.
Gear Motor, also called Engine Gearboxes, is a specific type of electrical motor that is designed to create high torque while maintaining a minimal horsepower, or low acceleration, motor output. Equipment motors are available in many different applications, specifically for the greenhouse, livestock and agricultural industry, our motors are available options to operate roof vents, wall structure vents,roof shading and screening, they put on the shaft with chain couplings that compensate for alignment errors and can be very easily removed without disturbing the whole shaft.
shaft-mounted gear motors are finish electromechanical drives where the speed of the installed electrical motor is reduced to the desired value using two to 4 reduction stages. The drives are powerful and durable and show a concise and lightweight design.

Did you discover greenhouse gear motor valuable, pease allow us know in the following comments box.