DC MOTOR PUMP GROUP one
General Description
Consisting of the heavy duty DC motor along with the CB1S gear pump, this pump motor group is an suitable hydraulic energy unit for mobile hydraulic equipments, this kind of as vehicle carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP two
Standard Description
This motor pump includes 4.5″ DC motor, a CBSR gear pump with built-in relief valve and examine valve.
DC MOTOR PUMP GROUP 3
Common Description
This motor pump consists of a four.5″ DC motor and a CBSR gear pump that has a normal power up/gravity down circuit with a relief valve, a verify valve as well as a solenoid release valve.
Particular Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean every one of the hydraulic parts concerned prior to mounting the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~68 cst, which need to also be clean and cost-free of impurities. N46 hydraulic oil is suggested.
4. The electrical power unit need to be mounted horizontally.
5. The relief valve stress is preset about 25% increased than the working stress.
six. Flow control valve for lowing velocity adjustment is available unpon request.